News

Let's take stock of the most common mistakes in PCB design. How many of them have you made?

In the process of hardware circuit design, it is inevitable to make mistakes. Do you have any low-level mistakes?

What are the design standards for PCB pads?

The design standards for PCB pads are affected by multiple factors, including application requirements, component type, manufacturing process, and number of PCB layers. Here are some common PCB pad design standards and guidelines:

Do you know these 8 common PCB markings? What are their functions?

1. PCB stamp hole When assembling panels, in order to facilitate the separation of PCB boards, a small contact area is reserved in the middle, and the hole in this area is called a stamp hole. I personally think that the reason for the name stamp hole is that when the PCB is separated, it leaves ......

26 commonly used professional terms in the PCBA processing industry, how many do you know?

Here are 26 commonly used PCB professional terms

Three common reasons for PCB pads to fall off

During the use of PCBA boards, pads often fall off, especially when the PCBA boards are repaired. When using a soldering iron, it is very easy for the pads to fall off. How should PCB factories deal with this? This article analyzes the reasons for pads to fall off.

6 details to quickly improve your PCB layout quality

The layout of components in the PCB board is crucial. Correct and reasonable layout not only makes the layout more neat and beautiful, but also affects the length and number of printed wires. Good PCB device layout is extremely important to improve the performance of the whole machine.

What methods do PCBA engineers often use to protect circuits?

Protection devices are used to protect circuits and equipment from power failures or other damage. Here are several common types of protection devices and their descriptions:

Why do PCBA electronic engineers always put two 0.1uF and 0.01uF capacitors in the circuit?

We need to understand why PCBA electronic engineers put two capacitors in the circuit. First, we need to understand the concepts of bypass and decoupling.

<...35 36 37 38 39...60 >